Faststack™ Chimneys

Time saving chimney building in seven easy steps

step1

Step 1

Delivered to site ready for pointing (on the ground).

step2

Step 2

Crane into position on the trusses using the lifting eyes and loops supplied.

step3

Step 3

Drill through support plates and screw to trusses using the fixings provided.

step4

Step 4

Batten over the support plate as shown and tile the roof.

step5

Step 5

Apply the supplied sealant to the channel before and after flashing.

step6

Step 6

The lead is then dressed securely into the flashing channel.

step7

Step 7

Job done! The finished chimney is in place.

Six styles to choose from

othello

Othello

aragon

Aragon

hamlet

Hamlet

shylock

Shylock

hermia

Hermia

silius

Silius

Chimney Style & Location Mid Ridge inc Twinwall Gable End Ridge inc Twinwall Mid Ridge Party Wall inc Twinwall (Twin Pot)
Othello 552mm x 440mm
Approx 175 kg
Y N N
Aragon 777mm x 552mm
Approx 210 kg
Y N N
Hamlet 665mm x 890mm
Approx 220 kg
Y Y Y
Shylock 1340mm x 865mm
Approx 230 kg
Y Y Y
Hermia 1002mm x 777mm
Approx 250 kg
Y Y N
Silius 890mm x 777mm
Approx 300kg
Y N N

Choose a chimney position that suits your building (check with the table above)

gable-end

Gable End Ridges

The Gable End Ridge chimneys are designed to allow the brickwork to continue from the gable wall into the chimney unit.

mono-pitch

Mono Pitch

Mono Pitch chimneys do not have the natural stability of the ‘Ridge’ units and therefore require additional fixing points.

mid-ridge

Mid Ridge

In situations where the chimneys are not located directly over the gable wall, the Mid Ridge design can be used.

ORDER BRICK
& PAVER SAMPLES
TRADESMAN
RANGE
IBSTOCK
LITERATURE
BESPOKE
BLENDS
Head Office
Leicester Road, Ibstock, Leicestershire LE67 6HS
t: 01530 261999 f: 01530 257457
e: enquiries@ibstock.co.uk
VAT no: 114102047
Company No: 63230